After application, the nematodes actively search for their prey and penetrate them. The nematodes feed on the contents of the prey, excreting specific bacteria from their digestive tracts as they do so. These bacteria convert host tissue into products that the nematodes can easily ingest. The larvae die within a few days.
How to use Entonem
Preparation of the spray solution
Half an hour before preparing the product, remove the pack from the refrigerator and let it reach room temperature (20°C/68°F)
Break the contents of the sachet (250 million Steinernema feltiae) into smaller pieces
Use the entire pack and place the smaller pieces in a bucket containing five liters of water (at 15°C/59°F to 20°C/68°F)
Leave the bucket with the solution to stand for five minutes
Then stir the solution until all the lumps have disappeared before transferring it to the spray tank
Use the spray solution immediately after preparation
With a watering can, sprinkler system, backpack spray unit or vehicle-mounted spray unit
To avoid blockage, all filters should be removed
Use a maximum pressure of 12 bar on spraying boom or pistol
The spray nozzle opening should be at least 0.5 mm (500 microns)
Continuous mixing should take place to prevent nematodes sinking to the bottom of the spray tank
Dosage of 0.5 million nematodes/m²
Amount of spray solution depends on application method
Water the soil before and after application
Distribute the spraying solution evenly over the soil surface
Keep the soil moist for the first two weeks after application
Use 0.25 million nematodes/m² mixed into 0.125 litre spray solution (=1250 litres/hectare)
A wetting agent will improve efficacy
Spray the crop evenly with the Entonem solution
Repeat treatment every week as long as necessary
Best working conditions Entonem
Make sure the soil is moist
Soil temperature must be between 8°C/46.4°F and 33°C/91.4°F
Nematodes are very susceptible to ultraviolet light (UV): do not use them in direct sunlight
Leaf applications should only be carried out in the evening to minimize the influence of UV light and to maximize moisture content beneficial to the nematodes
Biological beneficials have a very short life expectancy and therefore need to be introduced into the crop as soon as possible after receipt. Failure to do so can have a negative impact on their quality. In case you do need to store Entonem, please follow the instructions below. Koppert B.V. is not liable for any loss of quality if the product is stored for longer than recommended and/or under incorrect conditions.
Shelf life: see package for expiation date
Storage temperature: 2°C/35.6°F - 6°C/42.8°F
Store in a dark place
The information given below is merely indicative. Tailored
advice can be provided if information is available on the
local factors that need to be taken into account, such as
the crop, the climate conditions and the level of infestation.
For the correct approach, please consult a Koppert specialist
or a recognized distributor of Koppert products.
m²/ standard packaging
m²/ large packaging
Only use products that are permitted in your country/state and crop. Check local registration
Koppert Biological Systems cannot be held liable for unauthorized use.
Koppert B.V. is not liable for any loss of quality if the product is stored for longer than
recommended and/or under incorrect conditions.
Pesticides can have (in)direct effects on natural enemies.
Our side effects app tells you how harmful different pesticides are.