• Fytofert S corn brochure

  means no clumps, dust, or blocked nozzles. Efficient Use: Lower application rates needed, with excellent coverage and no adjuvants required. Product Spec [...] Improved root growth Improved root mass Koppert vs. Competition Lower dose rates compared to conventional Sulfur. Easier to mix and clean the tank (less

• Amblydromalus limonicus

  exceptional reproductive capacity Delivers one of the highest predation rates among predatory mites Shows promising potential in the control of invasive [...] temperatures as low as 14 °C, it maintains high egg-laying and predation rates. Under fluctuating conditions, such as 16 hours at 16 °C and 8 hours at 10 [...] introduction as soon as the first pests are detected in the crop. Introduction rates typically range from 50-250 per m2/release. Releases should be repeated once

• Acadian Organic

  Use a surfactant for maximum dispersal and leaf adherence. Application rates for permanent crops should be adjusted based on plant size and leaf area [...] overhead, furrow, flood and other types of irrigation at the suggested rates. Apply after the system is fully pressurized and inject solution as necessary [...] treat with a solution of ACADIAN® Organic Liquid Seaweed Concentrate at the rate of 0.1 – 0.7% solution prior to transplanting. Late season and post-harvest

• NodoKare

  any specific compatibility instructions. Timing See label for application rates and general recommendations. Storage time after receipt Adhere to expiration

• Stratiolaelaps scimitus (Hypoaspis miles)

  stems. The reduction of the infestation level occurs at a slow but steady rate. Feeding behaviour of Stratiolaelaps scimitus Predatory mites pierce their [...] ly or as soon as the first pests are detected in the crop. Introduction rates typically range from 100-500 per m2/release. Consult a Koppert advisor or

• Casea

  at a rate of 1 to 3 million nematodes per liter of spray solution (average 1.5 billion /ha or 0.6 billion/acre) and against soil pests at a rate of 500 [...] should be at least 0.5 mm (500 microns – 35 mesh) - preferably high flow rate cone nozzle types Continuous mixing should take place to prevent nematodes

• V10

  prior to virus exposure Dosage Apply V10 once per crop cycle at the labeled rate and dilution. Always follow the EPA‑approved label directions. Timing Apply

• Scia-Rid

  should be at least 0.5 mm (500 microns – 35 mesh) - preferably high flow rate cone nozzle types Continuous mixing should take place to prevent nematodes [...] Do not store mixed suspensions Dosage Scia-Rid is typically applied at a rate of 2,000,000 nematodes per m². Timing Apply during the last irrigation after

• Eggjuvant

  viability. Consult with your Koppert representative for beneficial insect rates. Dosage Use 3.9 ounces / 110 grams per 100 gallons of spray. Combined use

• Cryptobug

  and should always be adjusted to the particular situation. Introduction rates typically range from 2-10 per m 2 /release. Releases should be made in infested