Larvanem

nozzle opening should be at least 0.5 mm (500 microns – 35 mesh) - preferably high flow rate cone nozzle types Continuous mixing should take place to prevent [...] sprayer, or a vehicle-mounted spray unit To avoid blockage, all filters should be removed, especially if finer than 0.3 mm (50 mesh) Use a maximum pressure

Treatment of bumblebee stings and allergies

such as near the eyes. As soon as possible after being stung, the person should take an anti-inflammatory (such as aspirin or ibuprofen) and place a cold [...] sting in the mouth or near the throat, specifically the pharynx, the patient should be taken to the hospital immediately; since the sting can result in blocked [...] arrhythmia or difficulties with breathing. In this case as well, the victim should be taken to a hospital for treatment and observation immediately. Hyper

Entonem

nozzle opening should be at least 0.5 mm (500 microns – 35 mesh) - preferably high flow rate cone nozzle types Continuous mixing should take place to prevent [...] sprayer, or a vehicle-mounted spray unit To avoid blockage, all filters should be removed, especially if finer than 0.3 mm (50 mesh) Use a maximum pressure

Capsanem

nozzle opening should be at least 0.5 mm (500 microns – 35 mesh) - preferably high flow rate cone nozzle types Continuous mixing should take place to prevent [...] sprayer, or a vehicle-mounted spray unit To avoid blockage, all filters should be removed, especially if finer than 0.3 mm (50 mesh) Use a maximum pressure

Pollination checklist tomato

high for a lengthy period, the hive and the colony may suffer damage. You should therefore position the bumblebee hive in the coolest spot, or at least in [...] of side effects, on paper or via the internet, or consult an adviser. You should preferably not position more than three hives together. Ensure that the

Capirel

nozzle opening should be at least 0.5 mm (500 microns – 35 mesh) - preferably high flow rate cone nozzle types Continuous mixing should take place to prevent [...] backpack sprayer or through a sprinkler system To avoid blockage, all filters should be removed, especially if finer than 0.3 mm (50 mesh) Use a maximum pressure

Eggjuvant

agitation, such as an airlift, will help maintain eggs in suspension. The eggs should be in solution no longer than 90 minutes after being mixed. Longer periods

Encarsia formosa

of En-Strip or Enermix depends on climate, crop and whitefly density and should always be adjusted to the particular situation. Start introduction preventively [...] Introduction rates typically range from 1-10 per m 2 /release. Releases should be repeated until control is achieved. At increasing temperatures it may

Aphidius colemani

days The dosage of Aphipar depends on climate, crop and aphid density and should always be adjusted to the particular situation. Start introduction preventively [...] Introduction rates typically range from 0.25-4 per m 2 /release. Releases should be repeated at least 3 times. Consult a Koppert advisor or a recognized

Aphidoletes aphidimyza

spread The dosage of Aphidend depends on climate, crop and aphid density and should always be adjusted to the particular situation. Start introduction as soon [...] Introduction rates typically range from 1-10 per m 2 /release. Releases should be repeated at weekly intervals until control is achieved. Consult a Koppert