En-Strip

soon after planting of the crop. Introduction rates typically range from 1-10 per m 2 /release. Releases should be repeated until control is achieved. At [...] soon as possible after receipt. If necessary, the product can be stored for 1-2 days. Storage temperature 8-10°C/47-50°F. Storage conditions In the dark. [...] Avoid hanging cards at places exposed to direct sunlight Dosage The dosage of En-Strip depends on climate, crop and whitefly density and should always be adjusted

Reducing our CO₂ footprint, one bottle at a time

Manual Wireless Beehome

Wireless BeeHome system can be identified (figure 2.1 & 2.2). Figure 2.1 Type plate transmitter. Figure 2.2 Type plate receiver. 7 The serial number – [...] Commissioning 4.1 Delivery 1 Transmitter 1 or more receivers 1 Timer 1 Antenna 1 Set of mounting brackets, consisting of 2 long and 2 short brackets 4 [...] systeem kan worden geïdentificeerd (zie figuur 2.1 & 2.2). Figuur 2.1 Typeplaat zender. 7 Figuur 2.2 Typeplaat ontvanger. Het serienummer is het unieke

Natutec_Airobreez_-_Directions_for_Use_-_Koppert.pdf

1.2 1.3 1.4 1.5 1.6 1.7 2 Sicherheit............................................................................................ 10 2.1 2.2 2.3 2.4 [...] 2 1.3 1.4 1.5 1.6 1.7 2 Sécurité...............................................................................................10 2.1 2.2 2.3 2.4 [...] Contents 1 About this document............................................................................. 6 1.1 1.2 1.3 1.4 1.5 1.6 1.7 2 Safety.

Isarid_SDS.pdf

Fax: +1 (810) 632-8771 Email: info@koppert.com 1.4. Emergency telephone: Poison Control Center 1-800-222-1222 SECTION 2. HAZARD(S) IDENTIFICATION 2.1. C [...] Mandatory hand protection PPE Labelling CEN Standard EN 374-1:2003 EN 374-3:2003/AC:2006 EN 420:2003+A1:2009 Chemical protective gloves Remarks Replace [...] protection LRP Pictogram PPE Labelling CEN Standard EN 166:2001 EN 172:1994/A1:2000 EN 172:1994/A2:2001 Panoramic glasses againstliquid splash Remarks

Trianum-G SDS

Product group : Trade product 1.2. Relevant identified uses of the substance or mixture and uses advised against 1.2.1. Relevant identified uses Main [...] measures 6.1. Personal precautions, protective equipment and emergency procedures 6.1.1. For non-emergency personnel Emergency procedures 6.1.2. For emergency [...] Fungicide Function or use category : Pesticides 1.2.2. Uses advised against No additional information available 1.3. Details of the supplier of the safety data

Trianum-P SDS

Product group : Trade product 1.2. Relevant identified uses of the substance or mixture and uses advised against 1.2.1. Relevant identified uses Main [...] measures 6.1. Personal precautions, protective equipment and emergency procedures 6.1.1. For non-emergency personnel Emergency procedures 6.1.2. For emergency [...] Fungicide Function or use category : Pesticides 1.2.2. Uses advised against No additional information available 1.3. Details of the supplier of the safety data

Encarsia formosa

parasitic wasp Encarsia formosa is available at Koppert as En-Strip . Encarsia formosa products En-Strip Enermix Expand all items How to use Encarsia formosa [...] soon after planting of the crop. Introduction rates typically range from 1-10 per m 2 /release. Releases should be repeated until control is achieved. At [...] wasp Encarsia formosa is available on cardboard strips as single species ( En-Strip ) and in combination with Eretmocerus eremicus ( Enermix ). Open package

Ercal

soon after planting of the crop. Introduction rates typically range from 1-10 per m 2 /release. Releases should be repeated at least 3 times at weekly intervals [...] soon as possible after receipt. If necessary, the product can be stored for 1-2 days. Storage temperature 8-10°C/47-50°F. Storage conditions In the dark. [...] Depending on the specific situation, it may be better to switch to the use of En-strip or Enermix . Consult a Koppert advisor or a recognized distributor of

Enermix

soon after planting of the crop. Introduction rates typically range from 1-10 per m 2 /release. Releases should be repeated at least 3 times at weekly intervals [...] soon as possible after receipt. If necessary, the product can be stored for 1-2 days. Storage temperature 8-10°C/47-50°F. Storage conditions In the dark. [...] Depending on the specific situation, it may be better to switch to the use of En-strip or Ercal . Consult a Koppert advisor or a recognized distributor of