Eggjuvant

NH, NJ, NV, NY, OK, OH, OR, PA, SC, SD, TX, UT, VA, VT, WA, WV, WI, WY Application For optimal results: Use water that is close to room temperature (59-68°F [...] viability. Consult with your Koppert representative for beneficial insect rates. Dosage Use 3.9 ounces / 110 grams per 100 gallons of spray. Combined use

Steinernema feltiae

for several days after application. When possible, irrigate the crop before and right after application For foliar application, spray nematodes when relative [...] surface Application through irrigation systems: Pressure-compensated irrigation systems are recommended. If not available, spray or drench applications are [...] should be at least 0.5 mm (500 microns – 35 mesh) - preferably high flow rate cone nozzle types Continuous mixing should take place to prevent nematodes

Rhyzobug

500 adults. Presentation 90 ml cardboard tube. Carrier Buckwheat hulls. Application Apply Rhyzobug in the evening. Open the cap and tap the beetles directly [...] soon as the first armoured scales are detected in the crop. Introduction rates in outdoor crops typically range from 500-3,000 per ha/release. Releases

Thripex

predatory mites . Presentation 1,000 ml bottle; 6 litre bucket. Carrier Bran. Application Turn and shake the bottle or bucket gently before use Bottle: Push the [...] as soon as the first pest mites are detected in the crop. Introduction rates typically range from 50-100 per m2/release. Releases should be repeated if [...] limonicus , Transeius montdorensis , Amblyseius andersoni ). Precautions Application of this product can cause sensitization or allergic reactions, we therefore

Cryptobug-L

size 1,000 larvae. Presentation 500 ml bottle. Carrier Buckwheat hulls. Application Deploy material on rock wool slabs, or in Diboxes close to or at a hotspot [...] or as soon as the first mealybugs are detected in the crop. Introduction rates typically range from 5-40 per m 2 /release. Releases should be repeated at

Heterorhabditis bacteriophora

surface Application through irrigation systems: Pressure-compensated irrigation systems are recommended. If not available, spray or drench applications are [...] be kept high for several days after application. When possible, irrigate the crop before and right after application Adding an adjuvant and/or an anti- [...] should be at least 0.5 mm (500 microns – 35 mesh) - preferably high flow rate cone nozzle types Continuous mixing should take place to prevent nematodes

Chrysopa-E

Pack size 100,000 eggs. Presentation 90 ml cardboard tube. Carrier None. Application Apply evenly on leaves Avoid clusters of eggs Can be applied with Natutec [...] and should always be adjusted to the particular situation. Introduction rates typically range from 10-100 eggs per m 2 /release. Releases should be made

Steinernema carpocapsae

for several days after application. When possible, irrigate the crop before and right after application For foliar application, spray the nematodes when [...] surface Application through irrigation systems: Pressure-compensated irrigation systems are recommended. If not available, spray or drench applications are [...] should be at least 0.5 mm (500 microns – 35 mesh) - preferably high flow rate cone nozzle types Continuous mixing should take place to prevent nematodes

Miglyphus

leaf. Pack size 500 adults. Presentation 100 ml bottle. Carrier None. Application Release parasitic wasps between the leaves of the crop in the morning [...] introduction as soon as the first mines are visible in the crop. Introduction rates typically range from 0.25-3 per m 2 /release. Releases should be repeated

Spidend

Presentation 550 ml plastic cup. Carrier Wood wool and dried cucumber leaves. Application Make a hole in the lid and place the cup on the rock wool slab or directly [...] as soon as the first spider mites are detected in the crop. Introduction rates typically range from 0.25-25 per m 2 /release. Releases should be repeated